Keysight M9421A - Ramp Up Start Level; Ramp Up End Level; Ramp Down Start Level

3 WLAN Mode
3.8 Power vs Time Measurement
Ramp Up Start Level
It specifies the relative value between ramp up start level and max power level
measured in ramp time length.
Remote
Command
[:SENSe]:PVTime:THReshold:UP:STARt <rel_ampl>
[:SENSe]:PVTime:THReshold:UP:STARt?
Example
:PVT:THR:UP:STAR -50.0
:PVT:THR:UP:STAR?
Preset -20.00 dB
State Saved Yes
Min -120.00 dB
Max 0.00 dB
Ramp Up End Level
It specifies the relative value between ramp up end level and max power level
measured in ramp time length.
Remote
Command
[:SENSe]:PVTime:THReshold:UP:STOP <rel_ampl>
[:SENSe]:PVTime:THReshold:UP:STOP?
Example
:PVT:THR:UP:STOP -50.0
:PVT:THR:UP:STOP?
Preset -0.915 dB
State Saved Yes
Min -120.00 dB
Max 0.00 dB
Ramp Down Start Level
It specifies the relative value between ramp down start level and max power level
measured in ramp time length
Remote
Command
[:SENSe]:PVTime:THReshold:DOWN:STARt <rel_ampl>
[:SENSe]:PVTime:THReshold:DOWN:STARt?
Example
:PVT:THR:DOWN:STAR -50.0
:PVT:THR:DOWN:STAR?
Preset -0.915 dB
1397 WLAN Mode User's &Programmer's Reference