Keysight M9421A - Evaluation Option; Meas Setup Summary Table; Auto Couple; Meas Preset

3 WLAN Mode
3.9 Spectral Flatness Measurement
Evaluation Option
This parameter allows you to choose either “magnitude of channel estimation” or
“subcarrier received values” to evaluate spectral flatness.
Remote
Command
:CALCulate:FLATness:EVALuation CESTimation | SCValues
:CALCulate:FLATness:EVALuation?
Example
:CALC:FLAT:EVAL CEST
:CALC:FLAT:EVAL?
Preset CESTimation
State Saved Yes
Range CESTimation | SCValues
Meas Setup Summary Table
The Meas Setup Summary Table lets you view and access many of the parameters in
the Meas Setup menus on one screen.
Auto Couple
The Auto Couple control immediately puts all Auto/Man functions into Auto. The
Auto Couple action is confined to the current measurement only. It does not affect
other measurements in the mode.
In the Auto state, Auto/Man functions are said to be “coupled”, meaning their value
will change depending on changes you make to other values in the measurement.
This helps ensure accurate measurements and optimum dynamic range. Auto
Couple is an immediate action function, and when it is executed, all the Auto/Man
controls for the current measurement are set to Auto and all measurement settings
coupled to the Auto/Man parameters are automatically set to their optimal value.
Remote
Command
:COUPle ALL
Example
:COUP ALL
Backwards
Compatibility
Notes
:COUPLE NONE puts all Auto/Man parameters in manual mode, decoupling all the coupled instrument
parameters. It is retained for backwards compatibility and is not recommended for making
measurements.
Meas Preset
Restores all the measurement parameters to their default values.
1493 WLAN Mode User's &Programmer's Reference