Keysight M9421A - EHT Other Guard Interval (Radio Std 802.11 be)

3 WLAN Mode
3.7 WLAN MIMO Modulation Analysis Measurement
Radio Std = 802.11be 320 MHz
:DEM:BE320:GINT R1B4
:DEM:BE320:GINT?
Couplings When Radio Std Detection is set to Auto Detect, EHT Guard Interval is coupled to “Auto Detect”
When EHT-LTF Size is set to “Auto Detect”, EHT Guard Interval is coupled to “Auto Detect”
When HE-LTF Size is set to “From SIG Syms”, EHT Guard Interval is coupled to “From SIG Syms”
Preset
AUTO
State Saved Saved in instrument state
Range
AUTO|R1B4|R1B8|R1B16|SIG|OTHer
EHT Other Guard Interval (Radio Std 802.11be)
Specifies the EHT guard interval length for each symbol time, when "EHT Guard
Interval Selection (Radio Std 802.11be)" on page 1517 is set to Other, this value will
be used as HE Guard Interval.
Remote
Command
Radio Std = 802.11be 20 MHz
[:SENSe]:DEMod[:WLAN]:BE20:GINTerval:LENGth <real>
[:SENSe]:DEMod[:WLAN]:BE20:GINTerval:LENGth?
Radio Std = 802.11be 40 MHz
[:SENSe]:DEMod[:WLAN]:BE40:GINTerval:LENGth <real>
[:SENSe]:DEMod[:WLAN]:BE40:GINTerval:LENGth?
Radio Std = 802.11be 80 MHz
[:SENSe]:DEMod[:WLAN]:BE80:GINTerval:LENGth <real>
[:SENSe]:DEMod[:WLAN]:BE80:GINTerval:LENGth?
Radio Std = 802.11be 160 MHz
[:SENSe]:DEMod[:WLAN]:BE160:GINTerval:LENGth <real>
[:SENSe]:DEMod[:WLAN]:BE160:GINTerval:LENGth?
Radio Std = 802.11be 320 MHz
[:SENSe]:DEMod[:WLAN]:BE320:GINTerval:LENGth <real>
[:SENSe]:DEMod[:WLAN]:BE320:GINTerval:LENGth?
Example Radio Std = 802.11be 20 MHz
:DEM:BE20:GINT:LENG 0.25
:DEM:BE20:GINT:LENG?
Radio Std = 802.11be 40 MHz
:DEM:BE40:GINT:LENG 0.25
:DEM:BE40:GINT:LENG?
Radio Std = 802.11be 80 MHz
1231 WLAN Mode User's &Programmer's Reference