Keysight M9421A - 3.1 Measurement Commands

3 WLAN Mode
3.1 Measurement Commands
3.1 Measurement Commands
Commands to select each measurement are shown below. Commands relating to
the views and windows for each measurement are described in the documentation
for each measurement.
Example
Measurement Selected Command
Channel Power
:CONFigure:CHPower
Spectrum Emissions Mask
:CONFigure:SEMask
Spurious Emissions
:CONFigure:SPURious
Occupied Bandwidth
:CONFigure:OBWidth
Power Stat CCDF
:CONFigure:PSTatistic
Modulation Analysis
:CONFigure:EVM
MIMO Modulation Analysis
:CONFigure:EVMMimo
Power vs Time
:CONFigure:PVTime
Spectral Flatness
:CONFigure:FLATness
Monitor Spectrum
:CONFigure:MONitor
IQ Waveform
:CONFigure:WAVeform
Preset
MONitor
State Saved Instrument State
WLAN Mode User's &Programmer's Reference 184