3 WLAN Mode
3.7 WLAN MIMO Modulation Analysis Measurement
64QAM-5/6 RMS EVM
This parameter is available when Radio Std is 802.11n, or 802.11ac.
Sets 64QAM coding rate 5/6 RMS EVM limit to warn you if the measured average
RMS EVM value exceeds a limit.
Remote
Command
:CALCulate:EVMMimo:LIMit:RMS:QA64:R5B6 <rel_ampl>
:CALCulate:EVMMimo:LIMit:RMS:QA64:R5B6
Example
:CALC:EVMM:LIM:RMS:QA64:R5B6 -20
:CALC:EVMM:LIM:RMS:QA64:R5B6?
Notes This limit value is used 802.11n, or 802.11ac
Preset -27.00 Db
State Saved Saved in instrument state
Min -1000
Max 0
256QAM-3/4 RMS EVM
This parameter is available when Radio Std is 802.11ac.
Sets 256QAM coding rate ¾ RMS EVM limit to warn you if the measured average
RMS EVM value exceeds a limit.
Remote
Command
:CALCulate:EVMMimo:LIMit:RMS:QA256:R3B4 <rel_ampl>
:CALCulate:EVMMimo:LIMit:RMS:QA256:R3B4
Example
:CALC:EVMM:LIM:RMS:QA256:R3B4 -20
:CALC:EVMM:LIM:RMS:QA256:R3B4?
Notes This limit value is used in 802.11ac
Preset -30.00 Db
State Saved Saved in instrument state
Min -1000
Max 0
256QAM-5/6 RMS EVM
This parameter is available when Radio Std is 802.11ac.
Sets 256QAM coding rate 5/6 RMS EVM limit to warn you if the measured average
RMS EVM value exceeds a limit.
WLAN Mode User's &Programmer's Reference 1268