Keysight M9421A - Meas Time Diagram; 3.6.8.4 Sync; Symbol Timing Adjust

3 WLAN Mode
3.6 Modulation Analysis Measurement
Meas Time Diagram
Provides a combination display of EVM results, Time setting parameters and the
Acquisition Time illustration.
–
I/Q Measured Polar Vector
–
EVM vs. Symbol
–
EVM vs. Carrier
–
Magnitude Error (802.11b/g only)
–
Phase Error (802.11b/g only)
–
Meas Interval
–
Meas Offset
–
Result Length Auto
–
Result Length
–
Max Result Length
–
Acquisition Point
3.6.8.4 Sync
Accesses synchronization parameter settings. These features are recommended for
use only by advanced users.
Symbol Timing Adjust
This parameter is available when Radio Std is NOT 802.11b/g(DSSS/CCK/PBCC).
Remote
Command
:CALCulate:EVM:SYMBol:ADJust <percent>
:CALCulate:EVM:SYMBol:ADJust?
:CALCulate:EVM:SYMBol:ADJust:AUTO ON | OFF | 1 | 0
:CALCulate:EVM:SYMBol:ADJust:AUTO?
Example
:CALC:EVM:SYMB:ADJ -3.125
:CALC:EVM:SYMB:ADJ?
:CALC:EVM:SYMB:ADJ:AUTO ON
:CALC:EVM:SYMB:ADJ:AUTO?
WLAN Mode User's &Programmer's Reference 1012