Keysight M9421A - Ref Position

3 WLAN Mode
3.8 Power vs Time Measurement
2-Rise for Transmit On/Off Power
:DISP:PVT:WIND3:TRAC:X:PDIV 1ms
3-Fall for Transmit On/Off Power
Couplings If X Auto Scaling is On, this value is automatically determined by the measurement result. When you set
a value manually, X Auto Scaling automatically changes to Off.
Preset 4 ms
State Saved Saved in instrument state.
Min 1.00 ns
Max 1.0 s
Backwards Compatibility SCPI
Window Numbers used to be a combination of View and Window, now the VIEW
parameter is not used and defaults to 1. All Windows are referenced through
VIEW1. For backwards compatibility the old View and Window numbers are
honored as below:
Window Old SCPI Command New SCPI Command
PVT - Burst :DISP:PVT:VIEW[1]:WIND:TRAC:X:PDIV 1ms :DISP:PVT:WIND[1]:TRAC:X:PDIV
1ms
PVT – Rise :DISP:PVT:VIEW2:WIND:TRAC:X:PDIV 1ms :DISP:PVT:WIND2:TRAC:X:PDIV 1ms
PVT – Fall :DISP:PVT:VIEW2:WIND2:TRAC:X:PDIV 1ms :DISP:PVT:WIND3:TRAC:X:PDIV 1ms
Ref Position
Sets the reference position for the X axis to Left, Center or Right.
Remote
Command
:DISPlay:PVTime:WINDow[1]|2|3:TRACe:X[:SCALe]:RPOSition LEFT | CENTer | RIGHt
:DISPlay:PVTime:WINDow[1]|2|3:TRACe:X[:SCALe]:RPOSition?
Window numbers are as follows:
Burst: 1
Rise: 2
Fall: 3
Example
:DISP:PVT:WIND:TRACE:X:RPOS LEFT
1-Burst for Transmit On/Off Power
:DISP:PVT:WIND:TRACE:X:RPOS?
1-Burst for Transmit On/Off Power
:DISP:PVT:WIND2:TRAC:X:RPOS LEFT
2-Rise for Transmit On/Off Power
1405 WLAN Mode User's &Programmer's Reference