Keysight M9421A - EHT Other Guard Interval (Radio Std 802.11 be)

3 WLAN Mode
3.9 Spectral Flatness Measurement
Radio Std = 802.11be 80 MHz
[:SENSe]:DEMod[:WLAN]:BE80:GINTerval AUTO | R1B4 | R1B8 | R1B16 | SIG | OTHer
[:SENSe]:DEMod[:WLAN]:BE80:GINTerval?
Radio Std = 802.11be 160 MHz
[:SENSe]:DEMod[:WLAN]:BE160:GINTerval AUTO | R1B4 | R1B8 | R1B16 | SIG |
OTHer
[:SENSe]:DEMod[:WLAN]:BE160:GINTerval?
Radio Std = 802.11be 320 MHz
[:SENSe]:DEMod[:WLAN]:BE320:GINTerval AUTO | R1B4 | R1B8 | R1B16 | SIG |
OTHer
[:SENSe]:DEMod[:WLAN]:BE320:GINTerval?
Example Radio Std = 802.11be 20 MHz
:DEM:BE20:GINT R1B4
:DEM:BE20:GINT?
Radio Std = 802.11be 40 MHz
:DEM:BE40:GINT R1B4
:DEM:BE40:GINT?
Radio Std = 802.11be 80 MHz
:DEM:BE80:GINT R1B4
:DEM:BE80:GINT?
Radio Std = 802.11be 160 MHz
:DEM:BE160:GINT R1B4
:DEM:BE160:GINT?
Radio Std = 802.11be 320 MHz
:DEM:BE320:GINT R1B4
:DEM:BE320:GINT?
Couplings When Radio Std Detection is set to Auto Detect, EHT Guard Interval is coupled to “Auto Detect”
When EHT-LTF Size is set to “Auto Detect”, EHT Guard Interval is coupled to “Auto Detect”
When HE-LTF Size is set to “From SIG Syms”, EHT Guard Interval is coupled to “From SIG Syms”
Preset
AUTO
State Saved Saved in instrument state
Range
AUTO|R1B4|R1B8|R1B16|SIG|OTHer
EHT Other Guard Interval (Radio Std 802.11be)
Specifies the EHT guard interval length for each symbol time, when "EHT Guard
Interval Selection (Radio Std 802.11be)" on page 1517 is set to Other, this value will
be used as HE Guard Interval.
WLAN Mode User's &Programmer's Reference 1518