Keysight M9421A - Channel Filter Bandwidth (Backwards Compatibility Remote Command Only); 3.12.5 Display; 3.12.5.1 View; View

3 WLAN Mode
3.12 IQ Waveform Measurement
Preset 0.2
State Saved Saved in instrument state
Min 0.01
Max 1.00
Backwards Compatibility
SCPI
[:SENSe]:WAVeform:WBIF:FILTer:ALPHa
Channel Filter Bandwidth (Backwards Compatibility Remote Command Only)
Dependencies Only available when Option DP2, B40, or wider IF Bandwidth option is installed
Couplings The value is determined by the following equation
ChannelFilterBwBwcc = (ChannelFilterBw/(DigitalIFBw*OverSampleRatio))
Preset 0.8
State Saved Saved in instrument state
Min 0.01
Max 1.0
Backwards
Compatibility SCPI
[:SENSe]:WAVeform:WBIF:FILTer:BANDwidth <real>
[:SENSe]:WAVeform:WBIF:FILTer:BANDwidth?
3.12.5 Display
Lets you configure display items for the current Mode, Measurement, View, or
Window.
3.12.5.1 View
Contains controls for selecting the current View, and for editing User Views.
View
See "Views" on page 1742.
User View
Lets you choose a View from the saved User Views for the current measurement.
This panel only appears if a User View exists for the current measurement.
Remote
:DISPlay:VIEW:ADVanced:SELect <alphanumeric>
WLAN Mode User's &Programmer's Reference 1798