Keysight M9421A - 3.4.7 Results for n = 12; 3.4.8 Results for n = 14

3 WLAN Mode
3.4 SEM Measurement
n Data
If the result is not available, -999.0 is returned
The number of values returned is subject to change in future releases
3.4.7 Results for n = 12
When "Measurement Type" on page 632 is Spectrum Peak reference, returns the
peak power of the signal in the ref channel
Otherwise, the value returned is -999.0
3.4.8 Results for n = 14
Returns comma-separated scalar results, in the following order:
k is an index for each offset: k = 0 for offset A; k = 1 for offset B; k = 2 for offset C, etc.
The number of offsets is 14 (A-N)
# Item Unit
1
10k + 1, k
= 0
Relative integrated power on the negative offset A
Returns NaN when "Measurement Type" on page 632 is
Spectrum Peak Ref
When "Measurement Type" on page 632 is
Total Power Ref: dBc
When PSD: dB
2
10k + 2, k
= 0
Absolute integrated power on the negative offset A
Returns NaN when "Measurement Type" on page 632 is
Spectrum Peak Ref
When "Measurement Type" on page 632 is
Total Power Ref: dBm
When PSD: dBm/Hz
3
10k + 3, k
= 0
Relative peak power on the negative offset A When "Measurement Type" on page 632 is
Total Power Ref PSD: dBc
Others: dB
4
10k + 4, k
= 0
Absolute peak power on the negative offset A When "Measurement Type" on page 632 is
PSD Ref: dBm/Hz
Others: dBm
5
10k + 5, k
= 0
Peak power offset frequency from the center or carrier edge
frequency in the negative offset A
Depends on the setting of "Offset Freq Define" on page 574
Hz
6
10k + 6, k
= 0
Relative integrated power on the positive offset A When "Measurement Type" on page 632 is
Total Power Ref: dBc
When PSD: dB
7
10k + 7, k
= 0
Absolute integrated power on the positive offset A When "Measurement Type" on page 632 is
Total Power Ref: dBm
When PSD: dBm/Hz
8
10k + 8, k
Relative peak power on the positive offset A When "Measurement Type" on page 632 is
Total Power Ref: dBc
WLAN Mode User's &Programmer's Reference 472