3 WLAN Mode
3.6 Modulation Analysis Measurement
User Number of Each RU
This parameter determines user number of each RU.
This is a list of parameters, and the length of the list is the number of RUs.
Remote Command
[:SENSe]:DEMod[:WLAN]:RU:LIST:USER <integer>,<integer>,<integer>,…
[:SENSe]:DEMod[:WLAN]:RU:LIST:USER?
Example
:DEM:RU:LIST:USER 1,1
:DEM:RU:LIST:USER?
Notes The length of the list is variable and determined by the number of RUs
Dependencies Only available for 802.11ax/ 802.11be
Preset
1
State Saved Saved in instrument state
User MCS
Determines MCS (modulation and coding schema) of each RU.
This is a list parameter, and the length of the list is the number of users.
Remote Command
[:SENSe]:DEMod[:WLAN]:USER:LIST:MCS <integer>,<integer>,<integer>,…
[:SENSe]:DEMod[:WLAN]:USER:LIST:MCS?
Example
:DEM:USER:LIST:MCS 0,11,0,11,0,11,0,11,0
:DEM:USER:LIST:MCS?
Notes The length of the list is variable and determined by the number of RUs
Dependencies Only available for 802.11ax/ 802.11be
Preset 08
State Saved Saved in instrument state
Min 0
Max 13
Spatial Stream Number of Each User
This parameter determines MCS (modulation and coding schema) of each RU.
This is a list parameter, and the length of the list is the number of users.
Remote Command
[:SENSe]:DEMod[:WLAN]:USER:LIST:STReam <integer>,<integer>,<integer>,…
[:SENSe]:DEMod[:WLAN]:USER:LIST:STReam?
1041 WLAN Mode User's &Programmer's Reference
To Next Page