3 WLAN Mode
–
CCDF
–
Modulation Analysis
–
Spectral Flatness
–
IQ Waveform
The following measurements are not available for use with Baseband I/Q Inputs.
–
Spectrum Emission Mask
–
Spurious Emissions
–
Monitor Spectrum
–
Channel Power
–
Occupied BW
–
Power vs Time
For unavailable measurements, the menu keys are not grayed out when Select Input
> I/Q key is selected. When in a measurement that does not support I/Q, it
generates an advisory message, and an error message will be displayed at the
bottom: “No result; Meas invalid with I/Q inputs”.
183 WLAN Mode User's &Programmer's Reference
To Next Page
Loading...
