Keysight M9421A - Page 1138

3 WLAN Mode
3.7 WLAN MIMO Modulation Analysis Measurement
Dependencies It’s only available for the following windows :
SEM,
EVM vs. Carrier,
Spectral Flatness,
Frequency Response,
Equalizer Impulse Response,
EVM vs. Symbol, when view type is Channel
IQ Polar Stream Metrics, when MIMO type is 8X8
Preset 1
State Saved Saved in instrument state
Min/Max Min: 1
Max:
MIMO 2x2, 2
MIMO 3x3, 3
MIMO 4x4, 4
MIMO 6x6, 6
MIMO 8x8, 8
80+80 MHz SISO, 1
Window Segment Number Selection
Remote Command
:DISPlay:EVMMimo:WINDow[1]|2|…|9:SEGMent <integer>
:DISPlay:PULSe:WINDow[1]|2|…|9:SEGMent ?
Example
:DISP:EVMM:WIND:SEGM 2
Dependencies It’s only available when radio standard is 11ac/ax 80+80 MHz for the following windows:
IQ Measured Polars,
EVM vs. Carrier,
EVM vs. Symbol
Spectral Flatness,
Frequency Response,
Equalizer Impulse Response,
IQ Polar Stream Metrics, when MIMO type is 4x4
IQ Polar Stream Metrics, when MIMO type is 4x4
Preset 1
State Saved Saved in instrument state
Min/Max Min: 1
Max
802.11ac/ax 80+80 MHz: 2
Else: 1
WLAN Mode User's &Programmer's Reference 1138