3 WLAN Mode
3.7 WLAN MIMO Modulation Analysis Measurement
You can disable this function in order to speed up your measurement. When Spur
Avoidance is turned Off, a warning message will appear in the status bar as
“Settings Alert; Spur Avoidance Off”. This is to alert you that measurement accuracy
might be impacted because you have defeated the spur avoidance algorithm.
Remote Command
[:SENSe]:EVMMimo:SAVoid[:STATe] ON | OFF | 0 | 1
[:SENSe]:EVMMimo:SAVoid[:STATe]?
Example
:EVMM:SAVoid ON
:EVMM:SAVoid?
Dependencies This control only appears in VXT models M9410A/11A/15A/16A
Preset ON
State Saved Saved in instrument state
Range On|Off
More Information
Maximum digital IF BW is limited by both Option and Center frequency.
For VXT models M9410A/11A:
Option limitation:
Option Max Digital IF BW
B40 40 MHz
B3X 300 MHz
B6X 600 MHz
B12 1200 MHz
Center frequency limitation:
Center Frequency Max Digital IF BW
330 MHz ~ 380 MHz (CF – 330 MHz) * 2
380 MHz ~ 550 MHz 100 MHz
550 MHz ~ 1310 MHz 200 MHz
1310 MHz ~ 2000 MHz (without Option EP6) 600 MHz
2000 MHz ~ 5480 MHz (without Option EP6) 1200 MHz
5480 MHz ~ 6080 MHz (without Option EP6) (6080 MHz – CF) * 2
1310 MHz ~ 1900 MHz (Option EP6) 600 MHz
1900 MHz ~ 6000 MHz (Option EP6) 1200 MHz
6000 MHz ~ 6600 MHz (Option EP6) (6600 MHz – CF) * 2
For VXT models M9415A/16A:
Option limitation:
WLAN Mode User's &Programmer's Reference 1202
To Next Page
Loading...
