Keysight M9421A - Page 2367

7 Save/Recall/Print
7.2 Recall
Vector-Number of Users Per each RU 1 1 1
Vector-Number of STS Per each user in each RU 1 1 1
Vector-Number of Tx Chains Per each RU 1 1 1
Vector-Modulation Format Per each user in each
RU
256QAM 256QAM 256QAM
Vector-MCS Per each user in each RU 8 8 8
Vector-CodingType Per each user in each RU 1 1 1
Vector-DCM Per each user in each RU 0 0 0
Following is the detailed explanation of each parameter.
Some parameters are noted as ‘decode only’ which indicates that these parameters
are just used for data decoding. If ‘Data Decode’ is disabled, there is no need to
specify these parameters in OFDMA setup file.
SIG-B Symbols |
HE-SIG-B / EHT-SIG symbols
The number of HE-SIG-B / EHT-SIG symbols
ofdm11axTBAfactor |
Pre-FEC Padding Factor (decode
only)
Pre-FEC Padding Factor
4 : Pre-FEC Padding Factor 0
1: Pre-FEC Padding Factor 1
2: Pre-FEC Padding Factor 2
3: Pre-FEC Padding Factor 3
ofdm11axTBPeDisambgty |
PE Disambiguity (decode only)
PE Disambiguity
0: no PE disambiguity
1: PE disambiguity
ofdm11axTBStbc |
STBC (decode only)
STBC
0: no STBC encoding;
1: STBC encoding
ofdm11axTBLdpcExtraSymSeg |
LDPC Extra Symbol Segment
(decode only)
LDPC Extra Symbol Segment
0: LDPC extra symbol segment isnotpresent;
1: the LDPC extra symbol segment is present
Vector-RU Size RU size of each RU
Vector-RU State Enable state of each RU, 0 disable, 1 enable
Vector-Number of Users Per each
RU
User number of each RU
Vector-Number of STS Per each
user in each RU
Stream number of each RU
Vector-Number of Tx Chains Per
each RU
Channel number of each RU
Vector-Modulation Format Per
each user in each RU
Modulation format of each user in each RU. BPSK, QPSK,
16QAM, 64QAM, 256QAM, 1024QAM, 4096QAM are valid
input
WLAN Mode User's &Programmer's Reference 2367