Table Of Contents
7.2.19 Select Complex Correction 2359
7.2.20 Recall VDI CCD Correction 2359
7.2.21 SCPI Recorder 2359
7.2.22 Recall From File 2360
7.2.23 Mask 2360
7.2.24 Sequence 2360
7.2.25 Waveform 2360
7.2.26 Load Segment to ARB Memory 2363
7.2.27 Delete Segment From ARB Mem 2364
7.2.28 Delete All From ARB Memory 2364
7.2.29 Set Default Directory (Remote Command Only) 2365
7.2.30 Query ARB Memory File List (Remote Query Only) 2365
7.2.31 Query ARB Memory Full File List (Remote Query Only) 2365
7.2.32 Demod Info 2366
7.2.33 Data Type (WLAN EVM / MIMO EVM Measurement) 2366
7.2.34 OFDMA Setup 2366
7.2.35 Reference Symbols 2369
7.2.36 Power Sensor Cal Factor 2370
7.2.37 Recording 2370
7.2.38 Data Type 2371
7.2.39 Channel 2372
7.2.40 Reset 2372
7.2.41 Recalled data channel table (Display only) 2373
7.2.42 CC Setup 2373
7.2.43 Frame Index (.scp and .pwsg only) 2373
7.2.44 Close VSA after recall (.setx only) 2374
7.2.45 Custom IQ Constellation State 2374
7.2.46 Memory Polynomial and Volterra Coefficients Files 2375
7.2.47 Sample file 2375
7.2.48 Coefficient Lengths 2377
7.2.49 How to apply the coefficients to signal 2378
7.2.50 Loss Comp 2379
7.2.51 Data Pattern 2380
WLAN Mode User's &Programmer's Reference 71
To Next Page
Loading...
