Table Of Contents
10.2.2 Center Frequency 2650
10.2.3 DC Coupled 2650
10.2.4 Detector Type 2651
10.2.5 Do Noise Correction 2651
10.2.6 Do Spur Suppression 2651
10.2.7 Electronic Attenuator Bypass 2652
10.2.8 Electronic Attenuation 2652
10.2.9 External Reference Frequency 2652
10.2.10 Frequency Reference Source 2653
10.2.11 IF Gain 2653
10.2.12 IF Type 2653
10.2.13 Include Power Spectrum 2653
10.2.14 Mechanical Attenuation 2654
10.2.15 Preamp Mode 2654
10.2.16 Resolution Bandwidth Mode 2654
10.2.17 Resolution Bandwidth 2655
10.2.18 Trigger Delay 2655
10.2.19 Trigger Level 2655
10.2.20 Trigger Slope 2655
10.2.21 Trigger Source 2655
10.2.22 Trigger Timeout 2656
10.2.23 Signal Input 2656
10.2.24 Use Preselector 2656
10.2.25 Channel Bandwidth Array 2656
10.2.26 Channel Filter Type Array 2657
10.2.27 Channel Filter Alpha Array 2657
10.2.28 Channel Measurement Function Array 2657
10.2.29 Channel Offset Frequency Array 2658
10.2.30 Channel Occupied Bandwidth Percent Array 2658
10.2.31 Channel x-dB Bandwidth Array 2659
10.3 Define Fast Power Measurement Query (Remote Command Only) 2660
10.4 Configure Fast Power Measurement (Remote Command Only) 2661
10.5 Initiate Fast Power Measurement (Remote Command Only) 2662
WLAN Mode User's &Programmer's Reference 81
To Next Page
Loading...
