365-575-102 Operation and Maintenance: IXL-001
Issue 8.0, July 2002 Page 7 of 14
FT-2000 MULTIPLEXER
Provision 1-Way-DRI Video Distribution Circuit
for Entire Ring Operations: NTP-007
Provision Low-Speed Slot and Port Parameters Detailed Level Procedure: DLP-517
Provision OC12 Slot for 1-Way Drop Service Detailed Level Procedure: DLP-547
Provision OC3 Slot for 1-Way Drop Service Detailed Level Procedure: DLP-540
Provision STS-1 Path Trace Detailed Level Procedure: DLP-531
Provision STS-1/STS-3 Non-Preemptible
Protection Access (NPPA) Operations: NTP-008
Release Looped Back DS3 and/or EC1 Circuit(s) Detailed Level Procedure: DLP-523
Release Looped Back OC-12 Line(s) Detailed Level Procedure: DLP-548
Release Looped Back OC-3 Line(s) Detailed Level Procedure: DLP-539
Remove and/or Install Circuit Pack Detailed Level Procedure: DLP-514
Remove OC-3/IS-3 Low-Speed Circuit Pack(s)
From the Shelf Circuit Order: NTP-011
Remove/Replace Shelf Cover Detailed Level Procedure: DLP-511
Replace a Defective Power-Line Filter Detailed Level Procedure: DLP-550
Replace Circuit Pack With Different Circuit Pack Detailed Level Procedure: DLP-527
Replace Defective Fan Unit in D-Bay Detailed Level Procedure: DLP-546
Replace Fan Filter (in E-Bay) Detailed Level Procedure: DLP-526
Replace Fan Filter Every Six Months (in D-Bay) Detailed Level Procedure: DLP-545
Replace Fuse in Power Distribution and Fuse
Panel or User Panel Detailed Level Procedure: DLP-515
Restore Network Element Operation After Power
Loss Trouble Clearing: TAP-171
Ring Reset Operations: NTP-012
STS3 (or STS1) Path Trace Monitor for Non-DS3
Signals Detailed Level Procedure: DLP-543
Temporarily Remove High-Speed Optical
Loopback(s) at FT-2000 Network Element Detailed Level Procedure: DLP-518
Test DRI Cross-Connections for Path Integrity in
FT-2000 Ring Detailed Level Procedure: DLP-541
Test Fan Assembly (ED-6G992-30) Detailed Level Procedure: DLP-513
Test Miscellaneous Discrete Telemetry Detailed Level Procedure: DLP-530
FIND YOUR JOB IN THE LIST BELOW . . . . . . . . . . . THEN GO TO
To Next Page
Loading...