■ Operating procedure (Refer to 7.2 “■ Accessing the Evaluating Condition Menu screen”)
Home screen to Main Menu ⇒ ⇒
Evaluating Condition Menu screen
1 Touch on the Evaluating Condition Menu screen.
Number of Sampling Lengths Setup
screen
2 Touch on the Number of Sampling Lengths Setup
screen.
Arbitrary Length Setup screen
3 Set an arbitrary evaluation length compatible with the target
surface.
TIP
• For information about numeric value entry, refer to
"2.2.4 Entering numeric values/characters" (page 2-5).
Number of Sampling Lengths Setup
screen
¾ The set arbitrary evaluation length appears on the Number of
Sampling Lengths Setup screen.
No. 99MBB765A
7-28
To Next Page
Loading...
