7. MODIFICATION OF THE MEASUREMENT CONDITIONS AND EVALUATING CONDITIONS
■ Operating procedure (when a Motif evaluation profile (R-Motif/W-Motif) is specified)
(Refer to
7.2 “■ Accessing the Evaluating Condition Menu screen”)
Home screen to Main Menu ⇒
Evaluating Condition Menu screen
1 Touch on the Evaluating Condition Menu screen.
Arbitrary Length Setup screen
2 Set an arbitrary evaluation length compatible with the target
surface.
TIP
• For information about numeric value entry, refer to
"2.2.4 Entering numeric values/characters" (page 2-5).
Evaluating Condition Menu screen
¾ The set arbitrary evaluation length appears on the Evaluating
Condition Menu screen.
No. 99MBB765A
7-29
To Next Page
Loading...
