In-Cutoff Setup screen
¾ Rulers are displayed on the In-Cutoff Setup screen.
The blue one is Ruler 1, the red one is Ruler 2.
Ruler 1 is selected the first time you set up.
(blue) is
displayed on the selected ruler.
In-Cutoff Setup screen
4 Touch a place to set the ruler 1.
To adjust the ruler position, touch
/ .
In-Cutoff Setup screen
5 Touch [Switch Ruler].
¾ The ruler 2 is selected and
(red) is displayed above.
TIP
• Touching [Ruler Switch] cycles through rulers.
In-Cutoff Setup screen
6 Touch a place to set the ruler 2.
To adjust the ruler position, touch
/ .
No. 99MBB765A
7-32
To Next Page
Loading...
