Mitutoyo SURFTEST SJ-410 - Page 239

8. MODIFYING PARAMETERS
No. 99MBB765A
8-7
■ Operating procedure (Refer to 8.1 "■ Accessing the Parameter Setup screen".)
Home screen to Main Menu ⇒ ⇒
Details Setting screen
1
Touch .
Sm/Pc/Ppi/Rc Setup screen
2
Touch the reference of the count level to be selected ( or
).
TIP
• For information about the calculation conditions, refer
to "8.3.1 Setting calculation conditions when Sm, Pc,
Ppi, or Rc are selected" (page 8-6).
Sm/Pc/Ppi/Rc Setup screen
 The background of the selected reference of the count level
( or ) becomes blue.
Sm/Pc/Ppi/Rc Setup screen
3
Touch the measurement type of the count level to be selected.
Sm/Pc/Ppi/Rc Setup screen
 The background of the selected measurement type becomes
blue.
The set measurement type for the height of the slice level will
switch.