Mitutoyo SURFTEST SJ-410 - Page 240

No. 99MBB765A
8-8
Count Level Setup screen
4
Setting the height of the slice level.
a Touch .
Count Level Setup screen
b Input the height of the slice level.
The input range is as follows:
0.0 - 99.9 %
0.0 - 9999.99 μm (0.0 - 393700.393 μin)
TIP • Touching sets the value to 0.
• For information about numeric value entry, refer to
"2.2.4 Entering numeric values/characters" (page 2-5).
Sm/Pc/Ppi/Rc Setup screen
c Touch .
 The set height of the slice level is displayed on the
Sm/Pc/Ppi/Rc Setup screen.