■ Connector name and function of each part on the display unit
● Rear of the display unit
USB connector SPC connector
RS-232C
connector
Drive/detector unit
connector
Built-in battery
on/off switch
AC adapter
connector
EXT.IN
connector
OPTION
connector
Rear of the display unit
• AC adapter connector
Used to connect the AC adapter cable for power supply.
• Built-in battery switch
Used to connect/disconnect the built-in battery and power circuit.
For more information about setting on/off the built-in battery switch, refer to "3.9
Power Supply" (page 3-24). Normally, set the switch to ON.
• USB connector
Used to connect the USB device.
• RS-232C connector
Used to connect the RS-232C.
• SPC connector
Used to connect the SPC.
• EXT.IN connector
Used to connect the external device.
• Drive/detector unit connector
Used to connect the drive/detector unit.
• Option connector
Used to connect the automatic positioning unit (optional).
No. 99MBB765A
1-10
To Next Page
Loading...
