Mitutoyo SURFTEST SJ-410 - Page 393

15. PRELIMINARY MEASUREMENT (AUXILIARY FUNCTIONS)
No. 99MBB765A
15-17
■ Operating procedure (Refer to "■ Accessing the Preliminary Measurement screen" in this chapter.)
Home screen to Main Menu ⇒
Preliminary Measurement Setup screen
1
Touch .
XYZ Adjustment Table screen
2
Reset all the micrometer heads to zero and touch .
XYZ Adjustment Table screen
3
Touch
[Drive Unit Operation] to display the Drive Unit
Operation screen.
Drive Unit Operation screen
4
Move the stylus to the first point.
Touch the buttons according to the direction
and distance to
reposition the stylus.
The movement speed differs depending on the size of the button
you press. The detector moves fastest with the largest button. As
you touch the smaller buttons, the detector moves slower.
Touching moves the stylus toward the origin position.
Touching
moves the stylus away from the origin position.
5 Touch [OK].