Mitutoyo SURFTEST SJ-410 - Page 395

15. PRELIMINARY MEASUREMENT (AUXILIARY FUNCTIONS)
No. 99MBB765A
15-19
XYZ Adjustment Table screen
12
Turn the Y-
axis adjustment knob to search for the maximum
position of the Z-coordinate, and touch .
XYZ Adjustment Table screen
13
Enter the micrometer head value of the Y-axis adjustment knob,
and touch
.
XYZ Adjustment Table screen
14 Turn the micrometer head (for swivel adjustment) up to the
correction value, and touch .
XYZ Adjustment Table screen
15
Turn the micrometer head (for tilt adjustment) up to the correction
value, and touch
.
XYZ Adjustment Table screen
 Adjustment has been completed.
Touch
[Close] to return to the Preliminary Measurement
screen.