Mitutoyo SURFTEST SJ-410 - Page 428

No. 99MBB765A
16-26
Analyze Step Size screen
3
Touch a place to set the ruler 1.
To adjust the ruler position, touch
/
.
Analyze Step Size screen
4
Touch [Switch Ruler].
 The ruler 2 is selected and
(red) is displayed above.
Analyze Step Size screen
5
Touch a place to set the ruler 2.
To adjust the ruler position, touch
/ .
Analyze Step Size screen
6
Touch [Calculate].
Analyze Step Size screen
 The results of concave step size analysis are displayed on the
screen.
TIP
• When is pressed on this screen, the profile is
printed with the results of concave step size analysis
and auxiliary line displayed.