16. DISPLAYING AND ANALYZING THE EVALUATION PROFILES AND GRAPHS
No. 99MBB765A
Analyze Step Area screen
Touch a place to set the ruler 2.
To adjust the ruler position, touch
/
.
Analyze Step Area screen
Touch [Calculate].
Analyze Step Area screen
The results of convex step area analysis are displayed on the
screen.
TIP
• When
is pressed on this screen, the profile is
printed with the results of convex step area analysis
and auxiliary line displayed.
■ Specifying the X-coordinate by entering the values
(Refer to 16.1 "■ Accessing the Analyze Waveform screen".)
Home screen ⇒ [Evaluation Profile] ⇒ [Analyze Waveform]
Analyze Waveform screen
Touch .
NOTE
• When R-Motif or W-Motif is selected for a profile motif,
the step area cannot be analyzed.
To Next Page
Loading...
