19. INSTALLING THE SJ-410 WITH OPTIONAL ACCESSORIES
4 Align the protrusion of the automatic positioning unit with the position of the drive
unit mount board to attach it.
Automatic positioning unit
Drive/detector unit
Protrusion
5 Tighten the 3 drive/detector unit securing screws to secure the automatic positioning
unit to the drive unit.
Drive unit mount board
Automatic positioning unit
Drive/detector unit
Drive/detector unit securing screw (M4 x 8)
6 Connect the automatic positioning unit cable and drive unit cable to the display unit
connector.
Automatic positioning unit connector
Display unit
Drive unit connector
No. 99MBB765A
19-5
To Next Page
Loading...
