19. INSTALLING THE SJ-410 WITH OPTIONAL ACCESSORIES
4 Attach the tilt adjustment unit to the X-axis adjustment unit using the 3 adjustment
unit mounting screws.
X-axis adjustment unit
Tilt adjustment unit
Adjustment unit mounting screws
(M4 x 8)
5 Attach the X-axis adjustment unit and tilt adjustment unit to the simple column stand
using the 3 mounting screws.
Simple column stand
Tilt adjustment unit
Mounting screws (M4 x 8)
X-axis adjustment unit
6 Attach the drive unit to the drive unit mount board of the X-axis adjustment unit using
the 2 drive/detector unit securing screws.
X-axis adjustment unit
Tilt adjustment unit
Drive/detector unit
Drive/detector unit securing screw
(M4 x 8)
Drive unit mount board
No. 99MBB765A
19-11
To Next Page
Loading...
