19. INSTALLING THE SJ-410 WITH OPTIONAL ACCESSORIES
4 Attach the automatic positioning unit and tilt adjustment unit to the simple column
stand using the 3 mounting screws.
Simple column stand
Tilt adjustment unit
Automatic positioning unit
Mounting screws (M4 x 8)
5 Attach the drive unit mount board to the rear of the drive/detector unit using the 2
mount board securing screws.
Drive unit mount board
Drive/detector unit
Mounting screws (M4 x 8)
6 Align the protrusion of the automatic positioning unit with the position of the drive
unit mount board to attach it.
Automatic positioning unit
Drive/detector unit
Protrusion
Drive unit mount board
No. 99MBB765A
19-13
To Next Page
Loading...
