4 Attach the automatic positioning unit and X-axis adjustment unit to the simple
column stand using the 3 mounting screws.
Simple column stand
X-axis adjustment unit
Automatic positioning unit
Mounting screws (M4 x 8)
5 Attach the drive unit mount board to the rear of the drive/detector unit using the 2
mount board securing screws.
Drive unit mount board
Drive/detector unit
Mounting screws (M4 x 8)
6 Align the protrusion of the automatic positioning unit with the position of the drive
unit mount board to attach it.
Automatic positioning unit
Drive/detector unit
Protrusion
Drive unit mount board
No. 99MBB765A
19-16
To Next Page
Loading...
