Mitutoyo SURFTEST SJ-410 - Page 533

22. PRODUCT SPECIFICATIONS
No. 99MBB765A
22-27
RTN Command
Reposition the detector to the original position. This command will be used for processes
such as returning from the extended out status.
• Command
Header
Sub-field
EM
CT
RTN
CR
• Response (normal)
Header
EM
OK
CR
● Write command
• Write command basic configuration
Header
(2 bytes)
Sub-field
(3 bytes)
Data
*1
EM
(1 byte)
WR
＊＊＊
＊＊＊＊
CR
*1: Data section may not be available depending on a command.
• Write command
Sub-field
Data
Meaning
CON
＊＊＊＊＊＊・・・
Modification of the evaluating conditions
COB
＊
Setting of calculation with B evaluating conditions
RAN
0 - 3 (1 byte)
Switching of range
VLC
＊
Switching of speed
OVR
＊
Process when over-range has occurred
RCA
None
Request for recalculation
RVL
＊
Modification of the returning speed
ART
＊
ON/OFF for the auto-return function
REC
＊
ON/OFF for retraction while returning
DRV
＊
ON/OFF for the X-axis operation
AST
＊
ON/OFF for the automatic positioning function
SCA
＊
ON/OFF for the automatic calculation while the process is aborted
ARM
＊
ON/OFF for the stylus arm correction