Mitutoyo SURFTEST SJ-410 - Page 545

22. PRODUCT SPECIFICATIONS
No. 99MBB765A
22-39
a: Returning speed
0: Measurement speed, 1: 0.5 mm/s (0.019 in/s), 2: 1.0 mm/s (0.039 in/s),
3: 2.0 mm/s (0.078 in/s), 4: 5.0 mm/s (0.196 in/s)
b: Auto-return
0: OFF, 1: ON
c: Retraction while returning
0: OFF, 1: ON
d: Measurement operation mode
0: OFF, 1: ON
e: Auto-start operation
0: OFF, 1: ON
f: Automatic calculation after the process is aborted
0: OFF, 1: ON
g: Stylus arm correction
0: OFF, 1: ON
PAR command
Reads number of parameters currently customized.
• Command
Header
Sub-field
Data
EM
RD
PAR
＊
CR
2 profiles specification 0: A profile, 1: B profile
• Response
Header
Data
EM
OK
＊＊
CR
＊＊：Number of pieces