RES command
Calculation results read command
• Command
Reading item
specification
Data section 1 byte: profile specification 0: A profile, 1: B profile
Data section 2-9 bytes: reading item specification
1)00,aa、bb: Calculated results only
aa: Customized parameter number is shown.
bb:
Multiple values with the same parameter 00-11, or results for each sampling length 00-20
• Response
******** (calculated results 8 digits)
2)01,aa、bb: Reading GO/NG judgment
aa: Customized parameter number is shown.
bb: Multiple values with the same parameter
• Response
0: GO/NG judgment OK
1: Upper limit NG
2: Lower limit NG
3: No GO/NG judgment
3)02,aa,bb: Parameter name, results, reading units
aa: Customized parameter number is shown.
bb:
Multiple values with the same parameter 00-11, or results for each sampling length 00-20
• Response
****** (Parameter name 6 digits),
******** (Calculation result 8 digits),
*** (Unit 3 digits) right justified