Rohde & Schwarz RTP Series - Page 1284

Remote control commands
R&S
®
RTP
1284User Manual 1337.9952.02 ─ 12
Suffix:
<m>
.
1..3
Parameters:
<CondLogic> AND | OR
AND
All the defined pattern conditions have to be met.
OR
At least one of the defined pattern conditions have to be met.
*RST: AND
Usage: Asynchronous command
TRIGger<m>:SERPattern:COMPlex:IDLRange
<IdleRange>
Selects if the timeout should be within the range or out of range.
Suffix:
<m>
.
1..3
Parameters:
<IdleRange> INR | OOR
INR: In range
OOR: Out of range
*RST: OOR
Usage: Asynchronous command
TRIGger<m>:SERPattern:COMPlex:SOFState <SOFState>
Selects if the alignment for the complex word pattern triggering is done on a pattern
value or on a defined timeout.
Suffix:
<m>
.
1..3
Parameters:
<SOFState> PATTERN | TIMEOUT
*RST: PATTERN
Usage: Asynchronous command
TRIGger<m>:SERPattern:COMPlex:SOFTimeout <SOFTimeout>
Sests the timeout, a duration that defines an idle mark, if TRIGger<m>:SERPattern:
COMPlex:SOFState is set to TIMEout.
Suffix:
<m>
.
1..3
Trigger