Rohde & Schwarz RTP Series - Page 612

Protocol analysis
R&S
®
RTP
612User Manual 1337.9952.02 ─ 12
Remote terminal address setup: Condition, RTA
The remote terminal address setup consists of the condition and one or two RTA pat-
terns.
The RTA setup settings are the same as in the MIL trigger setup, see "Remote Termi-
nal Address" on page 605.
Remote command:
SEARch:TRIGger:MILStd:CDST:RCONdition on page 1702
SEARch:TRIGger:MILStd:CMD:RCONdition on page 1702
SEARch:TRIGger:MILStd:DATA:RCONdition on page 1702
SEARch:TRIGger:MILStd:CDST:RMIN on page 1703
SEARch:TRIGger:MILStd:CMD:RMIN on page 1703
SEARch:TRIGger:MILStd:DATA:RMIN on page 1703
SEARch:TRIGger:MILStd:CDST:RMAX on page 1703
SEARch:TRIGger:MILStd:CMD:RMAX on page 1703
SEARch:TRIGger:MILStd:DATA:RMAX on page 1703
Data pattern setup: Condition, Data min, Data max
The data pattern setup consists of the condition and one or two data patterns.
The data pattern setup settings are the same as in the MIL trigger setup, see "Data
Pattern" on page 606.
Remote command:
SEARch:TRIGger:MILStd:DATA:DCONdition on page 1704
SEARch:TRIGger:MILStd:DATA:DMIN on page 1704
SEARch:TRIGger:MILStd:DATA:DMAX on page 1705
Data index setup: Condition, Index min, Index max
The data index setup consists of the condition and one or two index patterns.
The data index setup settings are the same as in the MIL trigger setup, see "Data
Index" on page 606.
Remote command:
SEARch:TRIGger:MILStd:DATA:ICONdition on page 1705
SEARch:TRIGger:MILStd:DATA:IMIN on page 1705
SEARch:TRIGger:MILStd:DATA:IMAX on page 1706
11-Bit information setup: Condition, Info min, Info max
The 11-bit information setup consists of the condition and one or two 11-bit information
patterns.
The 11-bit information setup settings are the same as in the MIL trigger setup, see "11-
Bit Information" on page 607.
Remote command:
SEARch:TRIGger:MILStd:CDST:ICONdition on page 1704
SEARch:TRIGger:MILStd:CDST:IMIN on page 1704
SEARch:TRIGger:MILStd:CDST:IMAX on page 1705
MIL-1553 (option R&S
RTP-K6)