Rohde & Schwarz RTP Series - Page 676

Protocol analysis
R&S
®
RTP
676User Manual 1337.9952.02 ─ 12
Remote command:
SEARch:TRIGger:TBTO:DATA:ICONdition on page 1801
SEARch:TRIGger:TBTO:DATA:IMIN on page 1802
SEARch:TRIGger:TBTO:DATA:IMAX on page 1801
Errors
Sets the type of error events to be searched for.
RS-FEC error ← Errors
Searches for RS-FEC errors.
Remote command:
SEARch:TRIGger:TBTO:ERRor:FEC on page 1802
CRC error ← Errors
Searches for a frame that has a mismatch of the Cyclic Redundancy Check (CRC)
value between the transmitting and receiving device.
Remote command:
SEARch:TRIGger:TBTO:ERRor:CRC on page 1802
Out of range error ← Errors
Searches for values that are out of range. This can be, for example a preamble error,
or invalid symbols in control blocks.
Remote command:
SEARch:TRIGger:TBTO:ERRor:OOR on page 1802
Zero terrnary symbol ← Errors
Searches for zero ternary symbol pairs (0-0).
Remote command:
SEARch:TRIGger:TBTO:ERRor:ZERO on page 1803
Ethernet 1000BASE-T1 (option R&S
RTP-K58)