Rohde & Schwarz RTP Series - Page 890

Protocol analysis
R&S
®
RTP
890User Manual 1337.9952.02 ─ 12
A ← MRReset ← DLLP MRDLLP conditions
Triggers on the value of the A bit (Ack/Request).
Remote command:
TRIGger<m>:PCIE:DLLP:MULT:RESA on page 2133
VH Group ← MRReset ← DLLP MRDLLP conditions
Triggers on the selected virtual hierarchies group.
Remote command:
TRIGger<m>:PCIE:DLLP:MULT:VHGR on page 2134
DLLP ACK/NAK conditions
Triggers on an acknowledgement (ACK)/ negative acknowledgment (NAK).
Sequence ← DLLP ACK/NAK conditions
Triggers on the sequence field indicating what TLPs are affected by the ACK/NAK.
Remote command:
TRIGger<m>:PCIE:DLLP:SEQ on page 2134
DLLP Init FC1/InitFC2/UpdateFC conditions
Triggers on flow control initialization/update conditions.
Credit Type ← DLLP Init FC1/InitFC2/UpdateFC conditions
Triggers on a credit type value.
"Any"
Triggers on any credit type.
"P"
Triggers on posted requests.
"NP"
Triggers on non posted requests.
"CPL"
Triggers on completions.
Remote command:
TRIGger<m>:PCIE:DLLP:FCTL:CRET on page 2131
VC ID ← DLLP Init FC1/InitFC2/UpdateFC conditions
Triggers on a virtual channel ID value.
PCIe (option R&S
RTP-K72/K73)