Rohde & Schwarz RTP Series - Page 889

Protocol analysis
R&S
®
RTP
889User Manual 1337.9952.02 ─ 12
VL Number ← MRInitFC1/InitFC2/UpdateFC ← DLLP MRDLLP conditions
Triggers on a virtual link (VL) number.
Remote command:
TRIGger<m>:PCIE:DLLP:MULT:VLNR on page 2134
VH Absent ← MRInitFC1/InitFC2/UpdateFC ← DLLP MRDLLP conditions
Triggers on absent virtual hierarchies (VH).
Remote command:
TRIGger<m>:PCIE:DLLP:MULT:HABS on page 2132
TLP Type ← MRInitFC1/InitFC2/UpdateFC ← DLLP MRDLLP conditions
Triggers on a transaction layer type for a multi-root data link layer trigger type.
"Any"
Any transaction layer type.
"P"
Posted credit.
"N"
Non posted credit.
"Cpl"
Completion credit.
Remote command:
TRIGger<m>:PCIE:DLLP:MULT:TLPT on page 2133
Credit Type ← MRInitFC1/InitFC2/UpdateFC ← DLLP MRDLLP conditions
Triggers on any, data or header credit type.
Remote command:
TRIGger<m>:PCIE:DLLP:MULT:CRET on page 2132
MRReset ← DLLP MRDLLP conditions
Specifies the conditions for the multi-root reset protocol trigger.
PCIe (option R&S
RTP-K72/K73)