Rohde & Schwarz RTP Series - Page 888

Protocol analysis
R&S
®
RTP
888User Manual 1337.9952.02 ─ 12
Phase ← MRInit ← DLLP MRDLLP conditions
Triggers on a phase state.
Remote command:
TRIGger<m>:PCIE:DLLP:MULT:PHAS on page 2133
VH FC ← MRInit ← DLLP MRDLLP conditions
Triggers on a virtual hierarchies flow control presence.
Remote command:
TRIGger<m>:PCIE:DLLP:MULT:VHFC on page 2133
Mixed Type ← MRInit ← DLLP MRDLLP conditions
Triggers on a mixed type presence.
Remote command:
TRIGger<m>:PCIE:DLLP:MULT:MIXT on page 2132
Authorized ← MRInit ← DLLP MRDLLP conditions
Triggers on an authorized state presence.
Remote command:
TRIGger<m>:PCIE:DLLP:MULT:AUTH on page 2132
Device/Port Type ← MRInit ← DLLP MRDLLP conditions
Triggers on an device/port type.
Remote command:
TRIGger<m>:PCIE:DLLP:MULT:DVPT on page 2132
MRInitFC1/InitFC2/UpdateFC ← DLLP MRDLLP conditions
Specifies the conditions for the multi-root initialization flow control protocol trigger.
PCIe (option R&S
RTP-K72/K73)