Rohde & Schwarz RTP Series - Page 887

Protocol analysis
R&S
®
RTP
887User Manual 1337.9952.02 ─ 12
Remote command:
TRIGger<m>:PCIE:TLP:CPLS on page 2138
Completer ID ← TLP (Transaction layer)
Triggers on a completer ID, consisting of the completer's bus number, device number,
and function number.
Remote command:
TRIGger<m>:PCIE:TLP:CPID on page 2137
DLLP Type
Sets the trigger to the type of DLLP. You can refine the settings for the different types
according to their specifications.
Remote command:
TRIGger<m>:PCIE:DLLP:TYPE on page 2134
DLLP Any Type conditions
Sets the trigger to any type of DLLP.
DLLP MRDLLP conditions
Specifies the conditions for the multi-root trigger.
MR DLLP ← DLLP MRDLLP conditions
Triggers on a multi-root type for the data link layer.
Remote command:
TRIGger<m>:PCIE:DLLP:MULT:TYPE on page 2133
MRInit ← DLLP MRDLLP conditions
Specifies the conditions for the multi-root initialization protocol trigger.
PCIe (option R&S
RTP-K72/K73)