Rohde & Schwarz SMBV100B - References

Configuring the Internal Baseband Source
R&S
®
SMBV100B
137User Manual 1178.4460.02 ─ 03
Figure 3-11: Example of data list
3. Select "Save" to store the used settings as a data list file.
The instrument stores the dl.dm_iqd file in the /var/user/ directory.
How to assign and activate data lists
Irrespectively on the way they are created, generated data lists are not automatically
used.
1. To enable the R&S SMBV100B to use the data list as data source for the custom
digital modulation:
a) Select "Baseband > Custom Digital Modulation > Data Source > Data List"
b) Select "Select Data List"
c) Navigate through the file system. Select the file and confirm with "Select".
2. To enable the R&S SMBV100B to use the data list as data source for any of the
digital standards:
a) Select the "Data List Name" in the individual dialog.
For example, for "Baseband > 3GPP FDD > Basestations > BS1 > Channel
Table > P-CCPCH > Data = Data List"
b) Select "DList = None".
c) Select the file in the file system.
3.5.5 References
Table 3-5: Custom digital modulation default values
Parameter Value
State Not affected
Data Source PRBS 9
Generating Custom Digital Modulated Signals