Getting Started
R&S
®
SMBV100B
84User Manual 1178.4460.02 ─ 03
For remote control over LAN or USB, you can use the R&S VISA (Virtual Instrument
Software Architecture) library provided for download at the Rohde & Schwarz website
http://www.rohde-schwarz.com/rsvisa.
How to configure the remote control interfaces is described in Chapter 11, "Network
Operation and Remote Control", on page 550.
2.5.8 Remote Operation over VNC
The VNC is an application which can be used to access and control the instrument
from a remote computer through a LAN connection. While the instrument is in opera-
tion, the instrument screen contents are displayed on the remote computer, and VNC
provides access to all applications, files, and network resources of the instrument.
Thus, remote operation of the instrument is possible.
Instrument control from a remote computer
To access the basic utility functions of the R&S SMBV100B, perform a right mouse
click on the block diagram and select "Key Emulation".
A key panel to the right of the block diagram gives access to the utility functions provi-
ded by the front panel keys.
The VNC is an add-on program, included in operating system Linux/Unix, and available
as a free-of-charge download on the internet.
For more information, refer to Chapter 11.16, "How to Set Up Remote Operation via
VNC", on page 599.
Instrument Control
To Next Page
Loading...
