Rohde & Schwarz SMBV100B - Modulation Settings

Configuring the Internal Baseband Source
R&S
®
SMBV100B
121User Manual 1178.4460.02 ─ 03
Select Data List
Accesses the standard "Select List" dialog to select an existing data list or to create a
new one.
Data lists can be generated externally or internally in the data editor.
●
Select the "Select Data List > navigate to the list file *.dm_iqd > Select" to select an
existing data list.
●
Use the standard "File Manager" function to transfer external data lists to the
instrument.
●
Use the "New" and "Edit" functions to create internally new data list or to edit an
existing one, see Chapter 3.5.3.7, "Data List Editor", on page 128.
See also Chapter 3.5.4.2, "How to Create and Assign a Data List", on page 136
Remote command:
[:SOURce<hw>]:BB:DM:DLISt:CATalog? on page 731
[:SOURce<hw>]:BB:DM:DLISt:SELect on page 731
[:SOURce<hw>]:BB:DM:DLISt:COPY on page 734
[:SOURce<hw>]:BB:DM:DLISt:DELete on page 732
Select Control List
Accesses the standard "Select List" dialog to select an existing control list or to create
a new one.
Control lists can be generated externally or internally in the "Control and Marker Lists"
editor.
●
Select the "Select Control List > navigate to the list file *.dm_iqc > Select" to select
an existing control list.
●
Use the standard "File Manager" function to transfer external lists to the instrument.
●
Use the "New" and "Edit" functions to create internally new list or to edit an existing
one, see Chapter 3.5.3.8, "Control and Marker Lists Editor", on page 130.
Irrespectively on the way they are created, control lists are not automatically used (see
"How to assign and activate control signals from a control list" on page 135).
Remote command:
[:SOURce<hw>]:BB:DM:CLISt:CATalog? on page 731
[:SOURce<hw>]:BB:DM:CLISt:SELect on page 731
[:SOURce<hw>]:BB:DM:CLISt:COPY on page 734
[:SOURce<hw>]:BB:DM:CLISt:DELete on page 732
Connector Settings
Accesses the connectors settings.
See Chapter 10.2, "Configuring the Global Connectors", on page 515.
3.5.3.4 Modulation Settings
Access:
► Select "Baseband > Custom Digital Mod > Modulation".
Generating Custom Digital Modulated Signals