Configuring the RF Signal
R&S
®
SMBV100B
363User Manual 1178.4460.02 ─ 03
The height of the bars corresponds to the selected amplitude of the pulse signal.
Zooming
You can zoom into the diagram to visualize the graph in more detail:
●
"Zoom Position": Sets the focus on the time axis where to enlarge the graph.
●
"Zoom In": Enlarges the graph at the selected position.
●
"Zoom Out" for the reverse operation.
6.11.4.5 Pulse External /Trigger Settings
Access:
► Select "RF" > "Analog Modulation" > "Pulse Modulation > Pulse External /Trigger".
Analog Modulations
To Next Page
Loading...
