Getting Started
R&S
®
SMBV100B
41User Manual 1178.4460.02 ─ 03
●
Rear Panel Tour
This section explains the control elements and the connectors of the R&S SMBV100B
with the aid of the front and rear views. For specifications of the interfaces, refer to the
data sheet.
2.2.1 Front Panel Tour
This section provides an overview of the control elements and connectors on the front
panel of the R&S SMBV100B. On the rear panel, you find all further connectors of the
unit, see Chapter 2.2.2, "Rear Panel Tour", on page 47. The user interface can be
displayed on a remote PC station used to manually remote control the instrument.
10
2
3
4
5
6
7
8 9
1
Figure 2-1: Front panel view
1 = Touchscreen, see Chapter 2.2.1.1, "Touchscreen", on page 41
2 = Utility keys, see "Utility Keys" on page 43
3 = [On/Standby], see "On/Standby" on page 43
4 = Function keys, see "Function Keys" on page 44
5 = Keypad, see "Keypad" on page 44
6 = Navigation controls, see "Navigation Controls" on page 45
7 = USB connectors, see Chapter 2.2.1.3, "Connectors", on page 46
8 = Sensor connector, see Chapter 2.2.1.3, "Connectors", on page 46
9 = User x input/output connectors, see Chapter 2.2.1.3, "Connectors", on page 46
10 = RF output connectors, see Chapter 2.2.1.3, "Connectors", on page 46
2.2.1.1 Touchscreen
The block diagram and the most important settings are displayed on the screen on the
front panel. Additionally, the screen display provides status and setting information and
allows you to quickly reconfigure the signal flow. The screen is touch-sensitive, offering
an alternative means of user interaction for quick and easy handling of the instrument.
Instrument Tour
To Next Page
Loading...
