Getting Started
R&S
®
SMBV100B
76User Manual 1178.4460.02 ─ 03
Underlined names are touch-sensitive. By touching them, you can execute a setting or
access the dialog or menu.
2.5.3.2 Block Diagram
The block diagram shows the current configuration and the signal flow in the generator
with the aid of function blocks, connected by signal lines.
1
= Status indicator
2 = Functional block
3a / 3b = Control signal block
4 = Signal line (digital)
5a / 5b = Graphics indicator
6 = Signal line (analog)
7a / 7b / 7c / 7d = Connector icons (RF, analog, digital)
8 = Stream indicator
Starting from left up to the "Stream Mapper", you can see the functional blocks provi-
ded in the baseband domain. After the stream mapper, the analog section contains the
digital to analog conversion and modulation to RF.
Legend Item Description
1 Status indicator Indicates whether the signal is running or waiting for a trigger.
2 Functional block Represents a basic task in signal generation.
The push button provides access to any number of associated
actions to accomplish the task.
The On/Off (checkbox) and the block label quickly activates the
basic task.
3 Control signal block Indicates information on the control signals like signal content,
input or output and provides quick access to the corresponding
configuration dialog.
A dedicated control block is displayed for each baseband (3a)
and RF block (3b).
Instrument Control
To Next Page
Loading...
