Getting Started
R&S
®
SMBV100B
53User Manual 1178.4460.02 ─ 03
Figure 2-4: Block diagram: Generating an unmodulated signal
The 1.95 GHz signal is output at the RF connector at the front panel of the
R&S SMBV100B.
Connect RF of the R&S SMBV100B to a signal analyzer, for example R&S
®
FSW, to
display the generated signal.
Figure 2-5: Simplified test setup
For the required settings of the signal analyzer, refer to its user manual or its online
help.
2.3.2 Generating a Digitally Modulated Signal
This example shows you how to generate a simple WCDMA-3GPP (QPSK 45° offset)
signal with the help of the "Custom Digital Modulation" functionality.
Trying Out the Instrument
To Next Page
Loading...
