Rohde & Schwarz SMBV100B - Check Front Panel

Maintenance
R&S
®
SMBV100B
931User Manual 1178.4460.02 ─ 03
Remote command:
:SYSTem:NTP:HOSTname on page 910
Use Time from NTP Server
Activates clock synchronization of the network via the NTP protocol.
Remote command:
:SYSTem:NTP:STATe on page 910
13.3.2 Check Front Panel
Within this dialog, you can verify the functionality of the control keys.
For Instructions on how to perform the tests and the expected results, see Chap-
ter 13.3.2.2, "How to Test the Front Panel", on page 932
In case of malfunctions:
Contact the Rohde & Schwarz customer support, see Chapter 14.6, "Collecting Infor-
mation for Technical Support", on page 951.
Accessing the online help in the check front panel dialog or exiting via [Esc]
During the test, the actual functions of all keys are disabled, including the [Help] and
the [Esc] keys.
13.3.2.1 Check Front Panel Settings
Access:
► Select "System Config > Setup > Maintenance > Check Front Panel".
Reflecting the front panel, the "Check Front Panel" dialog contains all functions to
test the operating elements of the instrument.
Performing Maintenance Tasks